Pre-Drilled Track Day Kits
Home | Calendar | About Ed Bargy | Contact Us | About The School | About Track-days | Merchandise | Bike Prep |
Online Registration Fax or mail in Registration | Race Track Design| Pricing & Policies | Links | FAQs
Make your track-day preparation a pleasure instead of a headache. Eliminate the cost and frustration of broken drill. Everything needed to make your bike track-ready is included. No need to cut into your wiring harness when you remove your side stand for the track day. The kit contains a clamp, metal strap or zip ties to bypass the side-stand safety switch. It will take someone with a little bit of mechanical ability about 1.5 hours to install. The next time you change your oil replace the stock parts with these, attach the safety wire and you are done. Save your stock parts to reinstall when you sell your bike.
Price: $30.00 +$3.00 S&H = $33.00
The Track-day kit contains everything you will need to complete the wiring requirements for the
Ed Bargy Racing School and most other Track-day requirements. The kit does not meet the full
racing wiring required by WERA.
The Kit contains:
• Pre-drilled filler cap
• Filler cap ""O"" ring (w/a)
• Pre-drilled case bolt
• Pre-drilled drain bolt
• Drain bolt washer
• Oil filter clamp
• Side stand safety switch by-pass metal strap (except Honda)
• Side stand safety switch by-pass clamp (except Honda)
• Side stand safety switch by-pass zip ties (Honda)
• 10' safety wire
Pre-drilled Track-Day Kits available for:
- Suzuki GSXRs
- Suzuki Bandits
- Suzuki Sv650s
- Suzuki Bandits
- Yamaha Rs
- Kawasaki Zxs
- Kawasaki EX 650s
- Honda RC51, CBRs & Fs
